Peptide Calculator in Units: Converting mL to U-100 Syringe Units
How to convert between mL, U-100 syringe units and mg for a reconstituted peptide vial, with a units-to-mL table and worked examples.
Short answer: on a U-100 syringe, 100 units = 1 mL, so 1 unit = 0.01 mL and 10 units = 0.1 mL. To find how much material a reading holds, multiply the vial concentration (mg/mL) by the volume in mL. Example: at 5 mg/mL, 10 units (0.1 mL) holds 0.5 mg and 1 unit holds 50 mcg.
Research use only. This page explains measuring and conversion maths for laboratory work. It recommends no amount and describes no use in people or animals.
U-100 units to mL
| Units | mL | At 2.5 mg/mL | At 5 mg/mL | At 10 mg/mL |
|---|---|---|---|---|
| 1 | 0.01 mL | 25 mcg | 50 mcg | 100 mcg |
| 5 | 0.05 mL | 125 mcg | 250 mcg | 0.5 mg |
| 10 | 0.1 mL | 0.25 mg | 0.5 mg | 1 mg |
| 20 | 0.2 mL | 0.5 mg | 1 mg | 2 mg |
| 25 | 0.25 mL | 0.625 mg | 1.25 mg | 2.5 mg |
| 50 | 0.5 mL | 1.25 mg | 2.5 mg | 5 mg |
| 100 | 1 mL | 2.5 mg | 5 mg | 10 mg |
The three formulas
- Concentration (mg/mL) = mg in the vial ÷ mL of bacteriostatic water added.
- mL = units ÷ 100 (U-100 syringe).
- Material in a reading = concentration × mL.
The peptide reconstitution calculator does all three and draws the syringe reading for you. For vial-specific tables see the guides for tirzepatide, retatrutide, semaglutide, BPC-157, GHK-Cu, MOTS-c and NAD+.
Syringe sizes and their scales
| Syringe | Capacity | Typical marks |
|---|---|---|
| 0.3 mL U-100 | 30 units | every 1 unit (some every 0.5) |
| 0.5 mL U-100 | 50 units | every 1 unit |
| 1 mL U-100 | 100 units | every 2 units |
Smaller syringes have finer marks, so they are easier to read for small volumes. A 1 mL syringe marked every 2 units cannot reliably show an odd number such as 5 units.
U-40 vs U-100: the classic mistake
U-40 syringes hold 40 units per mL, so one U-40 unit is 0.025 mL, 2.5 times a U-100 unit. Every chart on this site assumes U-100. Reading a U-40 syringe against a U-100 chart gives a volume 2.5 times larger than intended. Check the label on the syringe packaging.
Why units depend on how much water you added
A unit is a volume, not an amount. The same 10-unit reading holds 0.25 mg at 2.5 mg/mL and 1 mg at 10 mg/mL. That’s why every reconstituted vial should be labelled with its concentration, and why the water volume is chosen before the vial is mixed. Measure the water with Herbilabs bacteriostatic water: 10 mL vials, made in the EU, COA for every batch.
FAQ
How many units is 1 mL?
100 units on a U-100 syringe.
How many units is 0.25 mL?
25 units on a U-100 syringe.
How do I convert mg to units?
Divide the mg by the concentration to get mL, then multiply by 100. Example: 0.5 mg at 5 mg/mL = 0.1 mL = 10 units.
For research and laboratory use only. Not for human or veterinary use.


