How Much Bac Water for 10 mg Retatrutide? Volumes for 5, 10, 12, 20 and 30 mg Vials
How much bacteriostatic water to add to a 10 mg retatrutide research vial, plus 5, 12, 20 and 30 mg vials: water volume, resulting mg/mL and what 10 units on a U-100 syringe holds.
Short answer: most labs add 2 mL of bacteriostatic water to a 10 mg retatrutide vial, which gives 5 mg/mL. At that concentration 10 units on a U-100 syringe (0.1 mL) holds 0.5 mg. Adding 1 mL gives 10 mg/mL, and 3 mL gives 3.33 mg/mL. Both are also common, depending on how small a volume you want to measure.
Research use only. Retatrutide is an investigational compound, not approved for use in people. This page is about concentration maths for laboratory reconstitution. It recommends no amount and describes no use in humans or animals.
Bac water volume by retatrutide vial size
| Vial size | Common water volumes | Concentration | 10 units (0.1 mL) holds |
|---|---|---|---|
| 5 mg | 1 mL / 2 mL | 5 / 2.5 mg/mL | 0.5 / 0.25 mg |
| 10 mg | 1 mL / 2 mL / 3 mL | 10 / 5 / 3.33 mg/mL | 1 / 0.5 / 0.33 mg |
| 12 mg | 2 mL / 3 mL | 6 / 4 mg/mL | 0.6 / 0.4 mg |
| 20 mg | 2 mL / 3 mL / 4 mL | 10 / 6.67 / 5 mg/mL | 1 / 0.67 / 0.5 mg |
| 30 mg | 2 mL / 3 mL | 15 / 10 mg/mL | 1.5 / 1 mg |
The rule behind every row: concentration (mg/mL) = mg in the vial ÷ mL of water. Then mg in X units = concentration × X ÷ 100, because 100 units = 1 mL on a U-100 syringe.
How to pick the water volume
Work backwards from the volume you want to measure. If you want a given amount of material to sit at a round mark such as 10 or 20 units, divide the vial mg by the amount, then multiply by that volume in mL. Example: you want 0.5 mg at the 10-unit mark (0.1 mL). 10 mg ÷ 0.5 mg = 20, and 20 × 0.1 mL = 2 mL of water. The peptide reconstitution calculator does this automatically in its “How much water to add” tab.
- More water → lower concentration → each unit holds less → small amounts are easier to measure.
- Less water → higher concentration → smaller volume per withdrawal, but small reading errors matter more.
- Below about 2 units, a U-100 syringe is hard to read accurately. If your maths lands there, add more water.
Worked examples
10 mg vial + 2 mL bac water
10 ÷ 2 = 5 mg/mL. 1 unit = 50 mcg, 10 units = 0.5 mg, 20 units = 1 mg.
30 mg vial + 3 mL bac water
30 ÷ 3 = 10 mg/mL. 1 unit = 100 mcg, 10 units = 1 mg.
5 mg vial + 1 mL (calculator check)
5 ÷ 1 = 5 mg/mL, the same concentration as 10 mg in 2 mL. Same concentration means the same reading on the syringe for the same amount.
Reconstitution in brief
Bring the vial to room temperature, wipe the stoppers, add the water slowly down the glass wall, swirl until clear (don’t shake) and label the vial with the date and concentration. The full method is in how to reconstitute retatrutide. Store the reconstituted vial at 2–8 °C, protected from light.
Which water to use
Bacteriostatic water (sterile water with 0.9% benzyl alcohol) is the usual diluent for a vial that is entered more than once, because the preservative inhibits bacterial growth after the first puncture. Herbilabs reconstitution solution is 10 mL bacteriostatic water, made in the EU with a COA for every batch. One vial covers several 2–3 mL reconstitutions. See also bac water for peptides.
FAQ
How much bac water for 5 mg retatrutide?
1 mL gives 5 mg/mL; 2 mL gives 2.5 mg/mL.
How much bac water for 30 mg retatrutide?
3 mL gives 10 mg/mL; 2 mL gives 15 mg/mL.
How much bac water for 12 mg or 20 mg retatrutide?
12 mg: 2 mL = 6 mg/mL, 3 mL = 4 mg/mL. 20 mg: 2 mL = 10 mg/mL, 4 mL = 5 mg/mL.
Does more water weaken the retatrutide?
No. The total amount in the vial stays the same; more water only spreads it over a larger volume, so each unit holds less.
For research and laboratory use only. Not for human or veterinary use. Herbilabs supplies bacteriostatic water, not peptides.


